Enter the starting IP address to specify the range of addresses to be assigned dynamically by the DHCP server in the Starting IP Address field. The default gateway is the IP that it is assigned to the device to communicate with the network. By default, it is the IP address of the Ethernet (LAN) interface of the SPA122. Enter the IP address of the Default Gateway to be used by the DHCP clients in the Default Gateway field. Note: To add a different kind of client, please refer to the section DHCP Reservation. Click Show DHCP Reservation to view and manage the DHCP client list. If you choose to disable the feature, skip to Step 12.
The SPA122 can use the built-in DHCP server to dynamically assign IP addresses to connected devices. Click the Enabled radio button to enable the DHCP server, or click the Disabled radio button to disable this feature in the DHCP Server field.
Choose the Subnet Mask for your local network from the Subnet Mask drop-down list. The default IP address for the SPA122 is 192.168.15.1. Enter the LAN IP address for the SPA122 in the Local IP Address field. The router IP is used to connect the SPA122 with your local network. Log in to the Phone Adapter Configuration Utility and choose Network Setup > Basic Setup > Network Settings.
#Mac network settings router subnet mask how to
The objective of this document is to explain how to configure Network Settings on the SPA122 Phone Adapter. The device must have an IP address for identification to be able to connect to the network, and give the administrator the possibility to enter the web configuration utility to make changes. DHCP assigns IP addresses to hosts from a pool. Configure Network Settings for LAN and DHCP on SPA122 Objectiveĭynamic Host Configuration Protocol (DHCP) is a network configuration protocol that automatically configures the IP addresses of devices on a network so that they can communicate with each other.
0 kommentar(er)
